FIX for FSX Flight Design CTSW on floats  ( should also work for FS9 )

Not for use with wheeled version.

This fix is to coorect the reported problem of CTSW toppling over after landing on water.

Posted 17 December 2007

Installation:

1.Mark all the text below with your mouse and copy it to your clipboard ( 
Ctrl - C )
2. Open the aircraft.cfg file by double clicking on it.
3. Scroll down to the section headed [contact_points]
4. Paste the contents of your clipboard immediately underneath the existing 
numbers. ( Ctrl - V )
5. Either delete or disable the old numbers. Putting // at the left hand 
margin of each line will disable that line.


point.0=4.000,7.40,-3.50,-5.4,1600, 0, 0.00,  0.0, 0.85, 2.5, 0.65, 0.0, 0.0, 0, 0.0, 0.0
point.1=4.000,7.40,3.50,-5.4,1600, 0, 0.00,  0.0, 0.85, 2.5, 0.65, 0.0, 0.0, 0, 0.0, 0.0
point.2=4.000,-8.70,-3.50,-5.2,1600, 0, 0.00,  0.0, 0.85, 2.5, 0.65, 0.0, 0.0, 0, 0.0, 0.0
point.3=4.000,-8.70,3.50,-5.2,1600, 0, 0.00,  0.0, 0.85, 2.5, 0.65, 0.0, 0.0, 0, 0.0, 0.0
point.3=2.00,-0.250000,14.250000,2.20,1574.803150,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,6
point.4=2.00,-0.250000,-14.250000,2.20,1574.803150,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,5
point.5=2.00,-14.200,0.000,0.000,1574.803150,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,9
point.6=2.00,5.50,0.000,-0.000,1574.803150,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,4
point.7= 5, -9.20,-3.50,-6.95, 1600, 0, 0.00, 60.0, 0.0,  0.0, 1.0, 1.5, 1.5, 0.0, 0.0, 0.0
point.8= 5, -9.20,3.50,-6.95 , 1600, 0, 0.00, 60.0, 0.0,  0.0, 1.0, 1.5, 1.5, 0.0, 0.0, 0.0